Handlebar Switches; Front Brake Lever - Yamaha Xenter HW151 Owner's Manual

Handlebar switches

Left
1
2
3
1. Dimmer switch "%/&"
2. Turn signal switch "4/6"
3. Horn switch "*"
Right
1
1. Start switch ","
INSTRUMENT AND CONTROL FUNCTIONS
EAU12349
Dimmer switch "&/%"
Set this switch to "&" for the high
beam and to "%" for the low beam.
Turn signal switch "4/6"
To signal a right-hand turn, push this
switch to "6". To signal a left-hand
turn, push this switch to "4". When
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after it
has returned to the center position.
Horn switch "*"
Press this switch to sound the horn.
Start switch ","
Push this switch while applying the
front or rear brake to crank the en-
gine with the starter. See page 5-1 for
starting instructions prior to starting
the engine.
EAU12400

Front brake lever

EAU12460
1. Front brake lever
The front brake lever is located on
the right handlebar grip. To apply the
EAU12500
front brake, pull this lever toward the
handlebar grip.
This model is equipped with a unifi ed
brake system.
EAUM1132
As this system is mechanical, addi-
tional free play can be felt in the front
brake lever when the rear brake lever
is being applied. See "Rear brake
lever" for detailed information on the
unifi ed brake system.
3-7
EAU1044E
EAUS2010
1
1
2
3
4
5
6
7
8
9