Multi-Function Display - Yamaha Xenter HW151 Owner's Manual

to the coolant temperature in the
radiator.
● If the engine overheats, see page
6-34 for further instructions.
Engine trouble warning light "
This warning light fl ashes or stays on
if an electrical circuit monitoring the
engine is not working correctly. If this
occurs, have a Yamaha dealer check
the self-diagnosis system.
The electrical circuit of the warning
light can be checked by turning the
key to "ON". The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come
on initially when the key is turned to
"ON", or if the warning light remains
on, have a Yamaha dealer check the
electrical circuit.
INSTRUMENT AND CONTROL FUNCTIONS

Multi-function display

1 2 3 4 5 6 7
EAUT1934
"
1. V-belt replacement indicator "V-BELT"
2. Clock
3. Oil change indicator "OIL CHANGE"
4. "SELECT" button
5. Fuel level warning indicator " "
6. Fuel meter
7. Speedometer
8. Odometer
9. "RESET" button
10. Tripmeter 1
11. Ambient temperature display
12. Tripmeter 2
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function display. Changing
settings while riding can distract
the operator and increase the risk
EAUT3721
of an accident.
The multi-function display is equipped
8 9 11
10 12
with the following:
●
●
●
●
●
●
EWA14431
●
●
●
●
3-3
an odometer
a fuel reserve tripmeter (which
shows the distance traveled since
the bottom segment of the fuel
meter and fuel level warning indi-
cator started fl ashing)
two tripmeters (which show the
distance traveled since they were
last set to zero)
an oil change tripmeter (which
shows the distance traveled since
the last engine oil change)
an oil change indicator (which dis-
plays when the engine oil should
be changed)
a V-belt replacement tripmeter
(which shows the distance trav-
eled since the V-belt was last re-
placed)
a V-belt replacement indicator
an ambient temperature display
a clock
a fuel meter
EAU1044E
1
2
3
4
5
6
7
8
9