OPERATION AND IMPORTANT RIDING POINTS
Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do
not understand, ask your Yamaha
dealer.
s WARNING
s
Failure to familiarize yourself with
the controls can lead to loss of
control, which could cause an acci-
dent or injury.
5
EAU15951
TIP
This model is equipped with a lean
angle sensor to stop the engine in
case of a turnover. To start the engine
EWA10271
after a turnover, be sure to turn the
main switch to "OFF" and then to
"ON". Failing to do so will prevent the
engine from starting even though the
engine will crank when pushing the
start switch.
EAU45310
Starting the engine
NOTICE
See page 5-4 for engine break-in
instructions prior to operating the
vehicle for the first time.
In order for the ignition circuit cut-off
system to enable starting, the sides-
tand must be up.
See page 3-19 for more information.
1. Turn the key to "ON".
NOTICE
If a warning or indicator light does
not go off, see page 3-3 for the
corresponding warning and indica-
tor light circuit check.
2. Close the throttle completely.
5-1
The following warning lights and
indicator light should come on for
a few seconds, then go off.
●
Fuel level warning light
●
Engine trouble warning light
●
Immobilizer system indicator
light
EAUM2231
ECA10250
ECA11831