Adjusting The Throttle Cable Free Play - Yamaha YP125R Owner's Manual

1
ZAUM0704
1. V-belt case air filter cover
2. Screw
ZAUM0705
1. Screw
2. V-belt case air filter cover
3. Remove the air filter element, and
then blow out the dirt with com-
pressed air as shown.
PERIODIC MAINTENANCE AND ADJUSTMENT
1
2
ZAUM0706
1. V-belt case air filter element
4. Check the air filter element for
damage and replace it if neces-
sary.
5. Install the air filter element with
the colored side facing outward.
6. Install the V-belt case air filter
covers by installing the screws.
NOTICE: Make sure that each
1
filter element is properly sea-
2
ted in its case. The engine
should never be operated wit-
hout the filter elements insta-
lled, otherwise the piston(s)
and/or cylinder(s) may become
excessively worn.
7. Install the cowling.
6-15
Adjusting the throttle cable
free play
1. Throttle cable free play
The throttle cable free play should
measure 3.0 -5.0 mm (0.12 -0.20 in) at
the throttle grip. Periodically check
the throttle cable free play and, if
necessary, adjust it as follows.
TIP
The engine idling speed must be
correctly adjusted before checking
and adjusting the throttle cable free
play.
[ECA10531]
1. Remove cowling A (See page
6-6).
2. Loosen the locknut.
EAUS1290
6