Removing And Installing The Cowlings And Panel - Yamaha YP125R Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Removing and installing the
cowlings and panel
1. Cowling B
2. Cowling A
6
3. Panel A
4. Cowling C
1. Cowling D
EAU18731 The cowlings and panel shown need
to be removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each
time a cowling or panel needs to be
removed and installed.
Cowling A
To remove the cowling
1. Remove the cowling bolts.
1. Bolt
2. Cowling A
2. Disconnect the turn signal light
lead connectors, and then take
the cowling off.
EAU18900
1. Turn signal light lead coupler
To install the cowling
1. Connect the turn signal light lead
2. Place the cowling in the original
3. Install the cowling bolts.
6-6
connectors.
position.