Fuel Level Warning Light; Engine Trouble Warning Light; Immobilizer System Indicator Light - Yamaha YP125R Owner's Manual

Hide thumbs Also See for YP125R:
Table of Contents

Advertisement

Fuel level warning light "

This warning light comes on when the
fuel level drops below approximately
2 L (0.53 US gal) (0.44 Imp.gal). When
this occurs, refuel as soon as possi-
ble.
The electrical circuit of the warning
light can be checked by turning the
key to "ON".
If the warning light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical
circuit.

Engine trouble warning light "

This warning light flashes or stays on
if an electrical circuit monitoring the
engine is not working correctly. If this
occurs, have a Yamaha dealer check
the self-diagnosis system.
The electrical circuit of the warning
light can be checked by turning the
key to "ON". If the warning light does
not come on for a few seconds, then
go off, have a Yamaha dealer check
the electrical circuit.
INSTRUMENT AND CONTROL FUNCTIONS
EAU11350
"

Immobilizer system indicator light

" "
The electrical circuit of the indicator
light can be checked by turning the
key to "ON".
If the indicator light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical
circuit.
When the key is turned to "OFF" and
30 seconds have passed, the indica-
tor light will start flashing indicating
the immobilizer system is enabled.
After 24 hours have passed, the indi-
EAUT1932
cator light will stop flashing, however
"
the immobilizer system is still ena-
bled.
TIP
This model is also equipped with a
self-diagnosis device for the immobi-
lizer system. If the immobilizer system
is not working correctly, the indicator
light will start flashing a pattern when
the key is turned to "ON". When this
occurs, have a Yamaha dealer check
the self-diagnosis system. However, if
the indicator light slowly flashes five
EAU27021
times, and then quickly flashes two
times repeatedly, this error could be
caused by signal interference. If this
occurs, try the following.
1. Use the code re-registering key
TIP
Make sure there are no other immobi-
lizer keys close to the main switch,
and do not keep more than one
immobilizer key on the same key ring!
Immobilizer system keys may cause
signal interference, which may pre-
vent the engine from starting.
2. If the engine starts, turn it off, and
3. If one or both of the standard
3-4
to start the engine.
try starting the engine with the
standard keys.
keys do not start the engine, take
the vehicle, the code re-registe-
ring key and both standard keys
to a Yamaha dealer and have the
standard keys re-registered.
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yp125raXmax 125i

Table of Contents