Installing One Software At A Time - Fujitsu ScanSnap SV600 Basic Operation Manual

Installing One Software at a Time

Install the software one by one in the following procedure.
1.
Restart the computer.
2.
Log on as a user with Administrator privileges.
3.
If anti-virus software is running, disable the software temporarily.
ATTENTION
If you cannot disable the anti-virus software, check if the software is set to lock the application.
4.
Insert the Setup DVD-ROM into the DVD-ROM drive.
a The [ScanSnap Setup] dialog box appears.
5.
Click the [Close] button to close the [ScanSnap Setup] dialog box.
6.
Install the software.
Open the Setup DVD-ROM from Windows Explorer, and run the "setup.exe" of each software.
l ScanSnap Manager
DVD-ROM drive:\Software\ScanSnap\setup.exe
l ScanSnap Organizer
DVD-ROM drive:\Software\Organizer\setup.exe
l CardMinder
DVD-ROM drive:\Software\Card\setup.exe
Install one of the software above, and then install the following application.
l ScanSnap Online Update
DVD-ROM drive:\Software\Online Update\Setup.exe
a The setup dialog box appears.
Follow the instructions on the screen to continue with the installation.
If you cannot proceed further because a message appears to indicate that the software is
already installed, start over again from the procedure in
106).
7.
Restart the computer.
If You Have Installed the Software Before
"Uninstalling the Software" (page
113