Fujitsu ScanSnap SV600 Basic Operation Manual page 82

Follow the procedure below to modify the corner points and the outline.
1. Modify the corner points.
The corner points can be modified by either of the following:
l Drag the corner points to move them to the corners of the book and both ends of the
gutter.
l Double-click the corners of the book and both ends of the gutter.
a The corner points automatically move to the corners of the book and both ends of the
gutter.
2. Modify the outline.
Drag the outline to align it with the shape of the book. If it is hard to align the outline with the
shape of the book, position the outline little by little.
To make it easy, click an outline near the corner points and drag and drop the outline to align
it with the shape of the book repeatedly.
5.
Click the [Apply] button.
a A message for confirming the correction target appears.
6.
Click the [Selected Pages] button.
a The page distortion is corrected.
When you have completed correcting the page distortion, click the [Save and Exit] button.
82
Scanning Books