Conditions For Using The Carrier Sheet (For S1100) - Fujitsu ScanSnap SV600 Basic Operation Manual

Conditions for Using the Carrier Sheet (For S1100)

The Carrier Sheet (sold separately) is a sheet designed to transport documents through the
ScanSnap.
You can scan documents that are larger than A4/Letter size, photographs and clippings.
Conditions for documents that can be scanned using the Carrier Sheet are as follows:
AUTION
l Do not use a damaged Carrier Sheet. Otherwise, it may damage or cause
l Be careful not to cut your finger on the edge of the Carrier Sheet.
S1100
Eject method With the output guide closed
Document type Documents that cannot be loaded directly into the ScanSnap
Paper weight
Up to 127 g/m
l When scanning documents folded in half:
Up to 63.5 g/m
Paper size Carrier Sheet size (216 × 297 mm)
A3 (297 × 420 mm) (*1)
A4 (210 × 297 mm)
A5 (148 × 210 mm)
A6 (105 × 148 mm)
B4 (257 × 364 mm) (*1)
B5 (182 × 257 mm)
B6 (128 × 182 mm)
Postcard (100 × 148 mm)
Business card (90 × 55 mm, 55 × 90 mm)
Letter (8.5 × 11 in. (216 × 279.4 mm))
11 × 17 in. (279.4 × 431.8 mm) (*1)
l Custom size
Width: 25.4 to 216 mm (1 to 8.5 in.)
Length: 25.4 to 297 mm (1 to 11.69 in.)
*1: Fold in half to scan.
Documents for Which the Carrier Sheet is Recommended for
Scanning
It is recommended that you use the Carrier Sheet to scan the following documents.
l Documents written in pencil
Because there may be black traces left on the documents, it is recommended that you use the
Carrier Sheet to scan such documents.
Clean the rollers occasionally when you scan such documents directly without using a Carrier
Sheet because dirt accumulating on the rollers may cause feeding errors.
For details about how to perform cleaning, refer to "Troubleshooting" in the ScanSnap Manager
Help.
the ScanSnap to malfunction.
2
(34 lb)
2
(17 lb)
175
Documents for Scanning (For S1100)