Chapter 3 Connections
3.3 LAN Connection
3.3
LAN Connection
The ETERNUS DX Disk storage system requires a LAN connection for operation management.
In addition, information such as ETERNUS DX Disk storage system failures is notified to the remote support
center.
Make sure to connect each controller to the LAN for operation management.
Figure 3.12 Example of a LAN connection
Administration terminal
- Operation
management/setting
- Wake On LAN
ETERNUS DX
Disk storage system
When using ETERNUS Web GUI to manage operations, prepare a Web browser in the administration terminal.
The following table shows the supported Web browsers.
Table 3.3
ETERNUS Web GUI operating environment
Web browser
When using ETERNUS Web GUI to connect the ETERNUS DX Disk storage system, the default port number is 80
for http.
The LAN port for operation management on the ETERNUS DX Disk storage system uses Ethernet (1000Base-T /
100Base-TX / 10Base-T) for the interface. IPv4 and IPv6 are supported as Internet Protocols.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Site Planning-
SNMP
manager
Syslog server
Software
Microsoft Internet Explorer 7.0, 8.0, 9.0, 10.0 (desktop version)
Mozilla Firefox 3.6.x, ESR 10.0.x, ESR 17.0.x
Copyright 2013 FUJITSU LIMITED
Mail server
NTP server
Authentication
server
Remote support
center
Guaranteed operating environment
55
P3AM-4822-12ENZ0