Exterior Lighting And Signals; Side Lights - Renault Scenic Driver's Handbook Manual

EXTERIOR LIGHTING AND SIGNALS

1
2

Side lights

u
Turn the end of stalk 1 until the
symbol is opposite mark 4.
The instrument panel lights up and the
brightness can be adjusted using con-
trol knob 2. An indicator light on the in-
strument panel will come on.
Before driving at night, check that the electrical equipment is operating correctly and adjust the headlight beams (if
your vehicle is not carrying its normal load). In general, check that the lights are not obscured (by dirt, mud, snow or
objects which could cover them).
1.72
4
3
Switching on dipped
k
beam headlights
Manual operation
Turn the end of stalk 1 until the symbol
is opposite mark 4. An indicator light on
the instrument panel will come on.
Automatic operation (depending on
vehicle)
1
With the engine running, the dipped
beam headlights are switched on or off
automatically depending on the level of
ambient light, without the need to oper-
ate stalk 1 (position 0).
This function can be deactivated or re-
activated.
– To activate it press button 3, for at
least four seconds. Two beeps and
the 'Automatic lighting ON' message
confirm this action.
– To deactivate it, with the vehi-
cle stationary, press button 3 for
at least four seconds. A beep con-
firms this action and the message
'Automatic lighting OFF' appears on
the instrument panel.
If stalk 1 is operated, it overrides and
cancels the automatic function tempo-
rarily.