Renault Scenic Driver's Handbook Manual page 214

WHEEL TRIMS – WHEEL
D
1
B
2
A
3
Wheel trim (example wheel
trim 1)
Remove the wheel trim using hubcap
tool 3 (located in the tool kit) by engag-
ing the hook in the opening near the
valve 2.
To refit it, align it with valve 2. Push the
retaining hooks in fully, starting with
side A, followed by B and C, finishing
at the side opposite valve D.
5.10
4
C
Central wheel trim (example:
wheel trim 4)
Remove the wheel trim using the
hubcap tool (located in the tool kit), in-
serting the tool into recess 5.
To refit it, position it in line with recess 5
and tighten it with the tool.
We would advise you to note the
number engraved on the tool so that
you can replace it if it is lost.
5