Renault Scenic Driver's Handbook Manual page 173

REAR SEAT OPERATION: 5 seater version
6
To fit a seat
Before fitting a seat, check that bar 7 is
in contact with end stop 8.
If not, press control 9 and slide bar 7 up
to end stop 8.
When fitting side seats, make sure
that the seat belt guide 6 is located
on the door side.
(continued)
7
Engage the feet 11 in their anchor-
ing points: they will lock automatically.
Check that they are correctly locked.
Unlock catch 10, then lower the seat to
approximately ten centimetres from the
floor and let it go: the seat will position
itself under its own weight. Check that it
is correctly locked.
8
9
For safety reasons, carry
out any adjustments when
the vehicle is stationary.
10
11 11
3.37