CLOCK AND EXTERIOR TEMPERATURE
1
When the ignition is switched on, the
clock and (depending on vehicle) exter-
nal temperature are displayed.
Resetting the clock 1
Vehicle without button 2 (vehi-
cles fitted with navigation assistance
system, radio, etc.)
Refer to the equipment instructions for
the special features of these vehicles.
Vehicle with button 2
– press and hold button 2 for approxi-
mately three seconds;
– when the hour flashes, press
button 2 again to adjust it;
2
– wait approximately three seconds,
the minutes will flash, press button 2
to adjust them;
– wait approximately three seconds,
the minutes stop flashing, the time is
set.
In the event of a break in the electric
power supply (battery disconnected,
cut feed wire, etc.). The clock must
be reset.
Carry out these adjustments when
the vehicle is stationary.
Exterior temperature
indicator
When the outside temperature is
– 3°C to + 3°C, the °C characters flash
(signalling a risk of ice on the road).
External temperature in-
dicator
As ice formation is related
to exposure, local air hu-
midity and temperature, the exterior
temperature alone is not sufficient to
indicate the presence of ice.
1.67
Need help?
Do you have a question about the Scenic and is the answer not in the manual?