SEAT BELTS
(continued)
3
Adjusting the height of the
seat belt
Press button 3 to select the seat belt
adjustment height so that shoulder
strap 1 is worn as shown previously:
– to lower the seat belt, push button 3
and lower the seat belt simultane-
ously;
– to raise the seat belt, push button 3
upwards.
Make sure that the seat belt is locked
in position correctly after you have ad-
justed it.
1.22
1
4
6
To fasten
Unwind the belt slowly and smoothly
and click buckle 4 into catch 6 (check
that it is locked by pulling on buckle 4).
If the belt jams before it clicks in, allow
it to return before attempting to unwind
it again.
If your seat belt becomes completely
jammed:
– pull the belt slowly but firmly so that
just over 3 cm unwinds;
– then allow the belt to rewind auto-
matically;
– unwind it again;
– if the fault is still present, contact a
RENAULT Dealer.
5
Seat belt reminder
ç
6
light
This warning light on the instrument
panel goes out to let you know that the
seat belt has been correctly fastened.
Unlocking
Press button 5 on buckle 6 and the seat
belt will be rewound by the inertia reel.
Guide the buckle to help the operation.
Need help?
Do you have a question about the Scenic and is the answer not in the manual?