Connect Stand - Polycom VVX 500 Quick Start Manual

Connect Stand

Fully insert the stand into one of the
slots on the back of the phone. The slot
you choose determines the angle of
the phone. For high-angle use, secure
the handset with the reversible tab
(see Features).
*For wallmount installation, an optional accessory is available. For more information, contact your reseller.
Connect Optional Headset
Note: Your phone supports wired and
wireless headsets, including electronic
hookswitch (EHS) headsets. VVX 600
phones also support Bluetooth
headsets.
For connection directions, refer to
your headset documentation.
Standard headsets typically use the
RJ-9 or USB port, while
EHS headsets use the RJ-9 and serial
port. The ports are on the back of
your phone, as shown in the diagram.
For more information, see Using
Headsets with Polycom Phones,
available from
http://support.polycom.com/Polycom
Service/support/us/support/voice/
polycom_uc/polycom_profiled_uc_
software_features.html.
Connect Optional USB Devices
You can attach a Polycom VVX
Camera, USB headset, or USB flash
drive (to record calls, use the
Digital Picture Frame feature, or to
change the background picture on
your phone). To learn more, see
your phone s User Guide.
*
USB ports
RJ-9 port
USB port
AUX
Serial port
Press and slide the
cover up and off
USB port