Installing The Optical Drive - Lenovo ThinkServer RD240 Installation And User Manual

Figure 15. Removing the two retaining screws that secure the optical drive in the cage
8. If you are instructed to return the removed optical drive, follow all packaging
instructions and use any packaging materials that are supplied to you for
shipping.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
v To complete the removal procedure, go to "Completing the parts
replacement" on page 67.

Installing the optical drive

Attention
Do not open your server or attempt any repair before reading and understanding the Safety
Information and the Warranty and Support Information on the ThinkServer Documentation DVD
that comes with your product, and "Guidelines" on page 19. To obtain a copy of the
publications, go to:
http://www.lenovo.com/support
This section provides instructions on how to install the optical drive.
To install the optical drive, do the following:
1. If you are replacing the optical drive, make sure that:
v You have all the cables and other equipment that is specified in the
documentation that comes with the new optical drive.
v You have checked the instructions that come with the new optical drive to
determine whether you must set any switches or jumpers in the drive.
Chapter 5. Installing, removing, or replacing hardware
29