Lenovo ThinkServer RD240 Installation And User Manual page 91

Table 19. Submenus under the IPMI 2.0 Configuration
Item
View BMC System
Event Log
Clear BMC System
Event Log
Set LAN
Configuration
Set PEF PEF SUPPORT
Configuration
BMC Watch Dog
Timer Action
BMC Alert LED and
Beep
FW key
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 20. Submenu under the Intel VT-d Configuration
Item
Intel VT-d
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 21. Submenus under the Remote Access Configuration
Item
Remote Access
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 22. Items under the PCIPnP menu
Item
Clear NVRAM
Sub-item Option
Disabled
[Enabled]
[Disabled]
Reset System
Power Down
Power Cycle
[Off]
On
[0000000]
Option
Disabled
[Enabled]
Option
[Disabled]
Enabled
Option
[No]
Yes
Description
View the system
event log.
Delete the system
event log.
Set the IP address
source, IP address,
subnet mask, and
gateway address.
Enable or disable the
PEF support.
Disable or enable the
OS based dongle. If
enabled, whenever
any problems arising
from the operation
system, such as the
system halted, the
system management
feature will take
actions of Reset
System, Power
Down, or Power
Cycle at the prompt
of the dongle Timer.
Turn on or turn off
the BMC alert LED
and beep.
Description
Enable or disable the
virtualization technology for
I/O devices.
Description
Enable or disable the serial
port remote access.
Description
If this option is set to Yes,
that means to clear the
NVRAM information when
the system starts up.
Chapter 6. Configuring the server
77