Page 1
I N S T A L L A T I O N I N S T R U C T I O N S Instrucciones de instalación Istruzioni di installazione Installationsanleitung Installatie-instructies Instruções de Instalação Instructions d´installation Thinstall™ Medium Static Universal Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description MSTU...
MSTU Installation Instructions TOOLS REQUIRED FOR INSTALLATION M2.5 (included) 3/16” (4.8mm) M3 (included) M4 (included) 5/16” (7.9mm) M4 (included) M5 (included) PARTS A (1) B (2) [wall plate] C (1) [upright] E (4) D (4) F (4) G (4) H (4)
Installation Instructions MSTU Assembly And Installation Install four anchors (AA) into pilot holes drilled in Step 2. Use a hammer to tap anchors into holes. (See Figure 3) Wall Plate Installation Using Wood Studs Install four connector screws (D) through wall plate holes and into anchors.
Page 6
Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components located between the MSTU up to (and including) the display does not exceed 125 lbs (56.7 kg). NOTE: Make sure locking flags are in the open position before attaching display to wall plate.
Flags should stay in locked position unless removing display from wall bracket. Cable Management NOTE: For attaching and adjusting cables, the MSTU mount features a kickstand to allow access without having to remove display from the wall. Ensure kickstand is firmly in down position.
Page 8
Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 2668620 F +31 (0)40 2668615 Chief Manufacturing, a products Asia Pacific A Office No. 1 on 12/F, Shatin Galleria division of Milestone AV Technologies 18-24 Shan Mei Street...
Need help?
Do you have a question about the MSTU and is the answer not in the manual?
Questions and answers