Connecting The Handset And Optional Headset - Polycom SoundPoint IP 550 User Manual

Connecting the Handset and Optional Headset

To connect the PoE:
• Plug the supplied network cable between the LAN jack on the phone and
an available power and data port on the in-line power switch.
IEEE 802.3af compliant
PoE Hub/Switch
(terminal or middpan)
IEEE 802.3af compliant
PoE Hub/Switch
(terminal or middpan)
To connect the handset and optional headset:
1. Connect the short straight end of the phone cord to the handset and the
corresponding longer straight end of the cord to the handset jack on the
back of the phone.
Getting Started with Your Phone
PC Connection
(optional)
SoundPoint IP 550
PC Connection
(optional)
SoundPoint IP 560
1 - 5