Set The Date And Time; Eco Mode - Philips D400 User Documentation Files

Set the battery tone
Battery tone is the sound made when the
battery is low and needs recharging.
1
Press MENU/OK.
2
Select [Phone setup] > [Sounds] >
[Battery tone], then press MENU/OK to
confirm.
3
Select [On]/[Off], then press MENU/OK
to confirm.
» The setting is saved.
Set the sound profile
You can set the sound in the earpiece among 3
different profiles.
1
Press MENU/OK.
2
Select [Phone setup] > [Sounds] >
[MySound], then press MENU/OK to
confirm.
3
Select a profile, then press MENU/OK to
confirm.
» The setting is saved.

Set the date and time

For information, see 'Set the date and time (see
'Set the date and time' on page 9)'.

ECO mode

The ECO mode reduces the transmission
power of the handset and base station when
you are on a call or when the phone is in
standby mode.
1
Press MENU/OK.
2
Select [Phone setup] > [Eco mode], then
press MENU/OK to confirm.
3
Select [On]/[Off], and press MENU/OK to
confirm.
» The setting is saved.
» ECO is displayed in standby mode.
Note
•
When ECO mode is set to [On], the connection
range between the handset and the base station can
be reduced.
ECO+ mode
When the ECO+ mode is activated, it
eliminates the radiation of the handset and base
station in standby mode.
1
Press MENU/OK.
2
Select [Phone setup] >[ECO+ mode],
then press MENU/OK to confirm.
3
Select [On]/[Off], and press MENU/OK to
confirm.
» The setting is saved.
» ECO+ is displayed in standby mode.
Note
•
Make sure that all the handsets registered to the base
station are D400/D405 in order to have the ECO+
feature functioning properly.
•
When ECO+ is activated, the standby time is reduced.
This is because in ECO+ mode the base station is not
transmitting any signal in standby mode; therefore the
handset needs to "listen" more frequently for signals
from the base station to detect incoming calls or other
requests from the base station. The time it takes for the
handset to access features like call setup, call log, paging,
and phonebook browsing is also delayed. The handset
will not alert you to link loss in case of power loss or
moving out of range.
The following table shows you the current
status of the handset screen with different ECO
mode and ECO+ mode settings.
EN 23