Foxconn X38A User Manual page 74

Installing Serial ATA Hard Disks
1. Install SATA hard disks into the drive bays.
2. Connect one end of the SATA cable to motherboard's SATA onnectors and the
end to SATA hard disk.
3. Connect SATA power cable to the power connector of SATA hard disk.
BIOS Configuration
1. Enter the BIOS setup by pressing <Del> key during the POST.
2. Select the "Integrated Peripherals" form the "Main menu", then select the
"OnChip IDE Device" item and press <Enter> to display the configuration
items.
3. Switch the "SATA Mode" option to [RAID].
4. Press <F10> to save the BIOS setting and then exit the BIOS setup program.
RAID BIOS Configuration
Enter RAID BIOS Setup
Enter the Intel Matrix Storage Manager Option ROM Utility main menu by
®
pressing <Ctrl+I> keys W hen the following message appears on the screen
During the POST:
Press the <Ctrl-I> to enter Configuration Utility.
Note:
The RAID BIOS Setup pictures shown in this chapter are for reference
noly, please refer to the practical screen.
Creating RAID 0
1. Select "1.Create RAID Volume" from the utility main menu and press <Enter>.
The screen shows:
68
Chapter 5 RAID Configuration