Foxconn X38A User Manual page 36

vSerial Port2 Mode
This item is used to set the serial Port2 mode.The available setting values
are: [Normal], [IrDA 1.6us] and [IrDA 3/16 bit].
vIR Duplex Mode
Select full or half duplex mode for serial port 2.
vIRTX Pin Select
This item allows BIOS to select transmit pin in normal condition or inverse the
IRTX.
vIRRX Pin Select
This item allows BIOS to select receiver pin in normal condition or inverse the
IRRX.
vIR TX to Rx Delay Select
Allows BIOS to select IR from Tx to Rx 4 characters time delay for serial port 2.
vIR RX to Tx Delay Select
Allows BIOS to select IR from Rx to Tx 4 characters time delay for serial port 2.
2.4 AHCI Configuration
Scroll to this item and press <Enter> to view the following screen:
vAHCI CD/DVD Boot Time out
This option is used to set AHCI CD / DVD boot time out.
vAHCI Port0/ 1 / 2 / 3 / 4 / 5
W hile entering Setup, BIOS auto detects the presence of IDE devices. This
displays the status of auto detection of IDE devices.
30
Chapter 3
AHCI Configuration Menu
BIOS Description