Foxconn X38A User Manual page 26

Speaker Connector
CD_IN Connector
IrDA Connector
Chassis Intruder Connector: INTR
The connector connects to the chassis security switch on the case. The system
can detect the chassis intrusion through the status of this connector. If the
connector has been closed, the system will send a message.
20
Chapter 2 Installation Instructions
Speaker Connector: SPEAKER
The speaker connector is used to connect
speaker of the chassis.
+5V 1
Empty
NC
SPKJ
SPEAKER
Audio Connector: CD_IN
The connector allows you to receive ste-
reo audio input from sound sources such
as a CD-ROM.
1
GND
CD_L
CD_IN
IrDA Connector: IR
This header supports wireless transmit-
ting and receiving device. Before using this
founction, configure the settings of "Serial
port2 Mode" in CMOS Setup.
1
+5V
Empty
IRRX
GND
IRTX
IR
CD_R