Foxconn X38A User Manual page 17

3. Hold CPU with thumb and forefinger.
Ensure fingers align to socket cutouts.
Match the CPU triangle marker to Pin 1
position as shown below. The align-
ment key also provides the orientation
directed function. Lower the CPU
straight down without tilting or sliding
the CPU in the socket.
4. After installing the CPU, remove the pro
tective cover from load plate. The protec-
tive cover is used to protect the contacts of
the socket. Do not discard the protective
cover. Always replace the socket cover if
the CPU is removed from the socket.
5. Close the load plate, and slightly push
down the tongue side.
6. Lower the lever and lock it to the load
plate, then the CPU is locked completely.
Note :
Excessive temperatures will severely damage the CPU and system.
Therefore you should install the CPU cooling fan and make sure that it
works normally at all times in order to prevent overheating and damage
to the CPU. Please refer to your CPU fan user guide for correct
installation.
Chapter 2 Installation Instructions
Pin 1 position
Alignment
Key
Socket Cutouts
11