Install A New Windows Xp - Foxconn BLACKOPS User Manual

5-4 Install a New Windows XP

!
W
hen you set the SATA Mode in BIOS to either AHCI or RAID, you need
to follow these steps to install your Windows XP system.
1. Press <DEL> to enter BIOS Setup during POST.
2. Insert the Windows installation CD into the optical drive.
3. Set the "First Boot Device" to "CDROM", save changes and exit the BIOS setup.
► Hard Disk Boot Priority
CPU L1 & L2 Cache
CPU L3 Cache
Hyper-Threading Technology
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Security Option
APIC Mode
MPS Version Control for OS
OS Select for DRAM > 64MB
Delay For HDD (Secs)
Full Screen Logo Show
Small Logo(EPA) Show
Summary Screen Show
↑↓��������:Move Enter:Select
F5:Previous Values
4. The computer will reboot, and it will start installing Windows Operating System.
Watch the screen carefully, when the following picture appears, press <F6> key
immediately. If you forgot to do this, PC will go to an fatal blue screen, and you
may need to reboot the system again. PC may not respond to your <F6> input
immediately, and it keeps loading files until the next screen displays.
Windows Setup
Press F6 if you need to install a 3rd party SCSI or RAID driver.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Press Enter
Enabled
Enabled
Enabled
CD-ROM
CD-ROM
Hard Disk
USB-ZIP
Enabled
Disabled
On
Fast
Setup
Enabled
1.4
Non-OS2
0
Enabled
Enabled
Disabled
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
103
Item Help
Menu Level ►
Select Hard Disk Boot
Device Priorty
ESC:Exit F1:General Help
F7:Optimized Defaults