Quantum Bios - Foxconn BLACKOPS User Manual

Quantum BIOS

► CPU Feature
► Memory Timing Config
► All Voltage Control
► OC Gear
Over Clock Phase Select
Instant OverClocking
******* Ratio and Clock Setting *******
CPU Clock Ratio Unlock
x CPU Clock Ratio
CPU Clock Ratio + 0.5x CPU Clock Ratio + 0.5x
Target CPU Core Speed
CPU Clock�FSB��
CPU Clock vs Memory Speed
System Memory Speed
PCI Express Clock
PCI Clock
************ Miscellaneous ************
Auto Detect PCI Clk
Spread Spectrum
↑↓��������:Move Enter:Select ��������:Move Enter:Select
F5:Previous Values
► CPU Feature / Memory Timing Config / All Voltage Control / OC Gear
Press <Enter> to go to each Submenu.
► Over Clock (O.C.) Phase Select
It allows you to select the over clock phase. Setting values: �O.C. Disabled��; �Manual O.C.��;
�Instant O.C.��.
► Instant OverClocking
This item is used for instant OverClocking, you may choose over clock instantly by 5%,
10%,15%.....etc.
***Ratio and Clock Setting***
► CPU Clock Ratio Unlock
This item is used to enable or disable the CPU Clock Ratio Unlock. If CPU ratio is unlock, this
item will be hidden.
► CPU Clock Ratio
This item is used to set the ratio of an unlocked CPU. Using different CPU, the setting values
are different.
► CPU Clock Ratio +0.5x
This item allows you to set the N/2 ratio of an unlocked CPU. if CPU do not support N/2 ratio,
this item will be hidden.
► Target CPU Core Speed
This item shows target CPU core speed.
► CPU Clock(FSB)
This item allows you to set CPU clock.
► CPU Clock vs Memory Speed
When "CPU Clock Ratio" is set to "Manual O.C", this item allows you to set the ratio between
CPU Clock and Memory Speed.
► System Memory Speed
This item shows the System Memory Speed.
► PCI Express Clock
This item allows you to adjust the PCI Express bus clock.
Phoenix - AwardBIOS CMOS Setup Utility
:Move Enter:Select +/-/PU/PD:Value F10:Save +/-/PU/PD:Value F10:Save +/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
Quantum BIOS
Press Enter Press Enter
Press Enter
Press Enter Menu Level ►
Press Enter
O.C. Disabled
Default
Disabled
9 X
Enabled Enabled
2804MHz
266
Auto
800MH�
100MH�
33.6MH�
Enabled
Enabled
ESC:Exit F1:General Help ESC:Exit F1:General Help ESC:Exit F1:General Help
F7:Optimized Defaults
an unlocked CPU. if CPU do not support N/2 ratio, . if CPU do not support N/2 ratio,
44
Item Help