Install A New Windows Xp - Foxconn A7GMP-S User Manual

5-4 Install a New Windows XP

Assume a Mirrored array (249.99GB) was created as introduced in section 5-3, after
the system restarts :
1. Press <DEL> to enter BIOS Setup during POST.
2. Insert the Windows installation CD into the optical drive.
3. Set the "1st Boot Device" to "CD/DVD-ROM", save changes and exit BIOS.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
4. The computer will reboot, and it will start installing Windows Operating System.
Watch the screen carefully, when the following picture appears, press <F6> key
immediately. If you forget to do this, PC will go to an fatal blue screen, and you
may need to reboot the system again. PC may not respond to your <F6> input
immediately, and it keeps loading files until the next screen displays.
Windows Setup
Press F6 if you need to install a 3rd party SCSI or RAID driver.
Boot Device Priority
[CD/DVD:SS-DVD-ROM] [CDROM]
[HDD:SM-HDS728080PL] sequence from the
[1st Floppy Drive]
↑↓→←:Move Enter:Select
F1:General Help
Specifies the boot
available devices.
A device enclosed in
parenthesis has been
disabled in the
corresponding type
menu.
+/-/PU/PD:Value F10:Save
F9: Optimized Defaults
89
Item Help
ESC:Exit