Specifi Cations - Casio DT-X30 Series User Manual

Important !
Never short out the power contacts of the Cradle-type Battery Charger. This
can damage the Cradle-type Battery Charger.
Allowing the power contacts become wet can cause an electric shock or fi re. In
addition, if the contacts become soiled, contact may be impaired resulting in
poor charging. For reasons of safety and maintaining charging battery pack(s)
in optimum condition, clean the power contacts by wiping with a dry cloth or
cotton swab after disconnecting the AC adaptor.
When placing the DT-X30 into the cradle, make sure that it is seated properly
and that the power LED at the front of the Cradle-type Battery Charger is lit in
green. Charging and communication will not proceed properly if the Handheld
Terminal is not seated properly.
Specifi cations
1. Charging Specifi cations
Charging Method:
Charge Period:
2. Power Supply
Power Source:
Consumption Current:
Output to Handheld Terminal: 9.5V DC 2.7A (max.)
3. AC Adaptor
Model:
Input:
Output:
4. Dimensions and Weight
Dimensions:
Weight:
5. Operating Environment
Temperature:
Humidity:
* See page 44.
Constant current/voltage (the charging circuit is built in
DT-X30)
Approximately 5 hours
AC adaptor (AD-S42120B*)
12V DC 2.6A
AD-S42120B
100V to 240V AC 50/60Hz 1.2A
12V DC 3.5A
Approximately 120(W) 144(D) 129(H) mm
(4 "W 5
Approximately 300g (10.6oz)
0°C to 40°C (32°F to 104°F)
30% to 80% RH (non-condensation)
"D 5 "H)
E-49