Attaching The Hand Belt - Casio DT-X30 Series User Manual

Attaching the Hand Belt

The hand belt can be used to prevent the Handheld Terminal from dropping when
carrying it around. Attach the hand belt according to the procedure described below.
To attach the hand belt
1. Thread the belt through the hand belt hole as shown in the fi gure. Then fold it back
and secure using the hook-loop fastener.
2. Thread the other end of the belt through the hand belt hole and adjust the length so
that it fi ts comfortably on your hand. Then secure using the hook-loop fastener.
Important!
Stick the hook-loop fastener down straight.
Ensure that the folded-back part does not overlap.
See "Bad" example at right.
Good Bad Bad
E-23