Rear Panel - D-Link DVG-G5402SP User Manual

DVG-G5402SP User's Manual

Rear Panel

WARNING: DO NOT
phone port directly to a PSTN line (FXS to PSTN) or to an internal PBX line (FXS to PBX extension).
(3) Stacking is forbidden. Doing so may damage your VoIP Router.
Use Reset Button to restore factory default settings:
1. Power on.
2. Press and hold the reset button for 5 seconds.
3. Release the reset button. Factory settings will be restored.
D-Link Systems, Inc.
(1) connect the phone ports to each other (FXS to FXS) or (2) connect any
1.
Antenna: Connect to a wireless network.
2.
Line: Connect to your original telephone line on the
wall jack with RJ-11 cable.
3.
Phone Port (1-2): Connect to your phones using
standard phone cabling (RJ-11).
4.
LAN: Connect to your Ethernet enabled computers
using Ethernet cabling.
5.
WAN: Connect to your broadband modem using an
Ethernet cable.
6.
Power Receptor: Receptor for the provided power
adapter.
7.
Ground: A conducting connection with the earth.
Connect with the ground so as to make the earth a part of
an electrical circuit using metal wire.
Telephone Interface Description
6