Rear Panel - D-Link DSL-2877AL User Manual

D-Link DSL-2877AL Modem Router User Manual
Numb
Description
er
1
DSL Port - Use the DSL cable to connect to your telephone line (RJ-11 port).
Ethernet Ports - Use the Ethernet ports to connect the router to your Ethernet
2
LAN or Ethernet devices.
Reset Button - Press and hold the button about 3
3
device to its original factory default settings.
Power Receptor - Interface that connects to the power adapter of 12V DC,
4
1.5A.
2.4GHz Wireless On/Off Switch Button / WPS - Press the button to enable
5
2.4G/5GHz WLAN for 0-5 seconds, press the button to enable WPS for 5-10
seconds.
5GHz Wireless On/Off Switch Button / WPS - Press the button to enable
6
2.4G/5GHz WLAN for 0-5 seconds, press the button to enable WPS for 5-10
seconds.
7 USB1 Port - Use the USB port to connect your USB device.
Power Button - Push in to power-on the router. Push again to power-off the
8
router.

Rear Panel

s
econds to restore the
Page 5