Connecting The Router To Your Computer; Rear Panel Connections - D-Link DSL-G804V Quick Installation Manual

Connecting the Router to your
Computer
A、First, connect the power adapter to the power input at the back panel of the
DSL-G804V and then plug the other end of the power adapter to a wall outlet
or power strip.On the front of the device, the power LED will turrn ON to
indicate proper operation.
B、Insert one end of the Ethernet cable into an Ethernet(LAN) port on the back
panel of the DSL-G804V and the other end of the cable to an Ethernet Adapter
or available Ethernet port on your computer.
C、Insert the telephone cable included with the Router into the ADSL port, then
connect the cable to your telephone line.
D、Check the LED display on the front of the Router to confirm that the
connections have been made.

Rear Panel Connections

Antenna
Omni Directional
ADSL Modem
Port
Connect to your
ADSL provider
Console Port
Connect to
PS2/RS-232
LAN Ports
Connects to the
LAN and other
computers
Push in 5 seconds to
2
DC Power Input
Connect to DC
Adapter
Factory Reset
return to factory
default settings