Voip Router Web Configuration (Continued); Setup; Internet Setup - D-Link DVG-G5402SP User Manual

Voip wireless router

Hide thumbs Also See for DVG-G5402SP:

Table of Contents

DVG-G5402SP User's Manual

3. VoIP Router Web Configuration (continued)

WAN (Wide Area Network) Settings are used to connect to your ISP (Internet Service Provider). The WAN

settings are provided to you by your ISP and oftentimes referred to as "public settings". Please select the

appropriate option for your specific ISP.

IP Configuration (Setting WAN Port)

There are five methods of obtaining a WAN port IP address:

DHCP, which means a Dynamic IP (Cable Modem)

Static IP

PPPoE (dial-up ADSL)

PPTP

Methods for using DHCP and PPPoE for obtaining an IP address may vary. If you are not familiar with

creating a network connection, please contact your local ISP.

After selecting the suitable option, click Accept at the bottom of the screen to save the settings.

You need to save the changes and restart the VoIP Router to make the changes active. Saving the settings:

Click MAINTENANCE and select Save/Restart in Backup and Restore from the left menu. Tick Save

Settings and Restart, and then click Accept. Wait for about 40 seconds before the VoIP Router obtaining

an IP address by the method you selected.

Note: When the system has obtained a new IP address, and you are using a WAN port to enter the Web

Configuration Screen, the new IP address has to be used before you can get connected to the VoIP Router.

The same principle applies to the next two settings.

D-Link Systems, Inc.

SETUP

Table of Contents