D-Link DVG-G5402SP User Manual page 57

DVG-G5402SP User's Manual
ADVANCED → VoIP → Line
Enable: Tick the check box to enable a line. If some lines are not used, disable them (Pause Function) to
avoid unnecessary waiting when an incoming call is diverting to the line.
Flash Time: Enter the time for PSTN to detect if the voltage keeps the on-hook status.
PSTN Ring OFF Length: Enter the ring length detected if the remote party is on-hook from PSTN by PSTN
port. If the ring length form PSTN is longer than this setting, the PSTN will be on-hook, and it will stop the
ringing from FXS.
CO Line Type: Select PSTN (48V) or PABX (24V) for the CO line type connected to PSTN port.
ADVANCED → VoIP → Line
Ring (Early Media) Time Limit[10 - 600secs]: Enter the timeout to cancel a call if no one answers the
phone.
Enable End of Digit Tone: Check the box to activate the function of playing a "Beep-Beep" tone to notify
the user that the call is in progress.
Force Calling Thru PSTN code: Enter the code to get a PSTN line before dialing out. For example: If you
specify code "33" in this option and would like dial "23456789" via a PSTN line: Dial "33" and you will hear
dial tone from the PSTN line, now you're able to dial "23456789" via PSTN line.
D-Link Systems, Inc.
ADVANCED
57