Requirements; Console; Computer; Cables - ATEN CS1732a User Manual

Requirements

Console

A VGA, SVGA, or Multisync monitor capable of the highest resolution
that you will be using on any computer in the installation.
A USB mouse
A USB keyboard
Note: A PS/2 keyboard and mouse can used by using the converter included
in the package

Computer

The following equipment must be installed on each computer:
A VGA, SVGA or Multisync card.
USB Type A port, or PS/2 keyboard and mouse ports.

Cables

Only cable sets specifically designed to work with this switch may be used to
link to the computers. Two 1.2 m cables sets are provided with the CS1732
package. Four (two 1.2 m and two 1.8 m) cable sets are provided with the
CS1734 package. They use the USB to transfer the keyboard and mouse input
A
from your console to the computer.
Both switches also support computers that use PS/2 connectors to transfer
keyboard and mouse data. Cable sets with PS/2 connectors, as well as longer
cable sets are available from your dealer. See the following table for details:
Connector
USB
USB
USB
USB
PS/2
PS/2
Note: The CS1732
cable set connections. It will not work with PS/2 cable set
connections. It may also require an extra power adapter.
Cable Length
1.2 m 2L-5301U
1.8 m 2L-5302U
3 m 2L-5303U
5 m 2L-5305U
1.2 m 2L-5301P
1.8 m 2L-5302P
/ CS1734 's USB hub function only works with USB
A A
Part Number
Introduction
A
3