Hardware Setup; Cable Connection - ATEN CS1732a User Manual

1. Important safety information regarding the placement of this
device is provided on page 29. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation are turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.

Cable Connection

To set up your CS1732
diagrams on the following pages, and do the following:
1. Plug your USB keyboard and USB mouse into the USB Ports located on
the unit's front panel.
2. Plug your monitor into the Console monitor port located on the unit's rear
panel and power on the monitor.
3. Plug your microphone and speakers into the Console microphone and
speaker jacks located on the unit's rear panel.
4. Using a KVM cable set (provided with this package), plug the custom
SPHD connector into any available KVM Port on the switch and plug the
accompanying microphone and speaker connectors into the KVM Port's
microphone and speaker jacks.
Note: 1. The connectors and jacks are color coded and marked with an
appropriate icon for easy installation.
2. Be sure that all the plugs are in the same KVM Port sockets (all
in Port 1, all in Port 2, etc.).
5. At the other end of the cable:
a) For PS/2 (see PS/2 Cable Connection, page 12), plug the keyboard,
mouse, video, microphone and speaker cables into their respective ports
on the computer.
/ CS1734 installation, refer to the installation
A A

Hardware Setup

(Continues on next page.)
Chapter 2
9