The Firmware Upgrade Utility; Before You Begin - ATEN CS1732a User Manual

The Firmware Upgrade Utility

The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a
smooth, automated process for upgrading the KVM switch's firmware. The
Utility comes as part of a Firmware Upgrade Package that is specific for each
device. New firmware upgrade packages are posted on our web site as new
firmware revisions become available.
http://www.aten.com

Before you Begin

1. From a computer that is not part of the KVM installation go to our Internet
support site and choose the model name of your device (CS1732
CS1734 ) to get a list of available Firmware Upgrade Packages.
A
2. Choose the Firmware Upgrade Package you want to install (usually the
most recent), and download it to your computer.
3. Power off the switch. Unplug the KVM cables from the back of the switch.
If you are using a power adapter, unplug it and remove its connector from
the switch's power jack
4. Slide the Firmware Upgrade Switch to the Upgrade position.
5. Use the Firmware Upgrade Cable provided to connect a COM port on
your computer to the Firmware Upgrade Port of your switch.
6. Power on the CS1732
The front panel LEDs flash together to indicate Firmware Upgrade Mode
is in effect.
/ CS1734 by plugging in one of the KVM cables.
A A
Chapter 6
/
A
25