Firmware Upgrade Recovery - ATEN CS1732a User Manual

CS1732 / CS1734
A A

Firmware Upgrade Recovery

If the firmware upgrade procedure is unnaturally aborted (due to an outage, for
example), the switch being upgraded may become inoperable and incapable of
accepting a normal firmware upgrade.
If this occurs, to recover, do the following:
1. Power off the CS1732
2. Slide the unit's Firmware Upgrade Switch to the UPGRADE position.
3. Connect the firmware upgrade cable.
4. Power on the CS1732
The CS1732 CS1734
A /
5. Start the firmware upgrade procedure again. See Starting the Upgrade,
page 26.
After the upgrade has successfully completed, do the following:
6. Power off the CS1732
7. Slide the unit's Firmware Upgrade Switch to the NORMAL position.
8. Power on the CS1732
28
User Manual
CS1734
A / A
CS1734
A / A
is now ready to be upgraded.
A
CS1734
A / A
CS1734
A / A
and ensure all LEDs are off.
.
and ensure all LEDs are off.
.