Step 1: Connecting The Antenna Cables - Philips DVDR3355 User Manual

Basic Connections - DVD recorder
ANT OUT ANT IN
RF IN
RF OUT
VCR/Cable Box/
Satellite Receiver
A
B
Step 1: Connecting the
antenna cables
These connections enable you to watch
and record TV programs using the
DVD recorder. If the antenna signal is
connected via a VCR, Cable Box or
Satellite Receiver, ensure that these
devices are turned on in order to watch
or record the cable programs.
If your TV is equipped with an
Antenna In (RF IN) jack only,
see page 13 for the complete connection
to your TV.
If you want to connect to a VCR
and/or Cable Box/Satellite Receiver,
see page 14~16 for the complete
connection to your TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
10
1_DVDR3355_55_eng_17842.indd 10 1_DVDR3355_55_eng_17842.indd 10
Antenna/
cable TV signal
TV
S-V ID E O
AU D IO IN
O U T
V ID E O IN
A
Connect the existing Antenna/Cable TV
signal (or from the Cable Box/Satellite
Receiver { RF OUT or TO TV } ) to the
ANTENNA jack on the DVD
recorder.
B
Use the supplied RF coaxial cable to
connect the TV
recorder to the antenna input jack on
your TV (VHF/UHF RF IN.)
jack on the DVD
2005-11-04 4:46:46 PM 2005-11-04 4:46:46 PM