Step 3: Connecting The Audio Cables; Option 1: Using An Audio Cable; Option 2: Using A Coaxial Cable - Philips DVDR3355 User Manual

Basic Connections - DVD recorder
Step 3: Connecting the
audio cables
This connection enables you to listen to
the sound.

Option 1: Using an Audio cable

You can connect the DVD recorder to a
two channel stereo system or receiver in
order to enjoy the stereo sound system.
Use the supplied audio cable (red/white
ends) to connect AUDIO L/R OUT1
or -OUT2 jacks to one of the following
devices with the same input jacks.
– a stereo system (for example, TV or
mini system.)
– a receiver with two channel analog
stereo.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
12
1_DVDR3355_55_eng_17842.indd 12 1_DVDR3355_55_eng_17842.indd 12
OR
Option 1
TV
S-V ID E O IN
AU D IO
O U T
V ID E O IN

Option 2: Using a Coaxial cable

You can connect the DVD recorder to
an AV amplifi er/receiver with a digital
multi-channel sound decoder in order to
enjoy multi-channel surround sound.
Use a coaxial cable (not supplied).
Connect the recorder to the receiver/
amplifi er from the coaxial jack of the
recorder to the digital input of the
receiver.
Before you start operating, set the Digital
Audio Output accordingly (see page 52.)
If the Digital Output setting does not
match your stereo's capabilities, the
stereo may produce a strong, distorted
sound or no sound at all.
Helpful Hint:
– Do not connect your TV's audio output
jacks to the AUDIO L/R (IN-EXT) jacks on
this DVD recorder, this may cause unwanted
noise.
(continued)
Option 2
DIGITAL IN
AV amplifi er/
receiver
2005-11-04 4:46:47 PM 2005-11-04 4:46:47 PM