Step 1: Basic Recorder Connections; Connecting The Antenna Cables - Philips DVDR7310H User Manual

A
B
Connecting the antenna
cables
These connections enable you to watch
and record TV programmes using this
recorder. If the antenna signal is
connected via a Cable Box or Satellite
Receiver, ensure that these devices are
turned on in order to watch or record
the cable programmes.
If you want to connect to a VCR
and/or a separate Cable Box/
Satellite Receiver, see page 19~21 for
other possible connections.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.

Step 1: Basic Recorder Connections

A
Connect the existing Antenna/ Satellite/
Cable TV signal (or from the Cable Box/
Satellite Receiver, labelled as RF OUT or
TO TV) to the ANTENNA
on the recorder.
B
Use the supplied RF coaxial cable to
connect the TV
recorder to the antenna input socket (or
labelled as VHF/UHF RF IN) on your TV.
Helpful Hint:
– Depending on how you have currently
connected your TV channel (directly from an
off-air antenna or cable box or VCR), you'll
have to disconnect some of the cables before
you make the antenna connection.
socket
socket on the
15