Basic Connections - DVD recorder
Quick Setup Overview
Antenna/cable TV signal
(optional)
Cable Box /
Satellite Receiver
(optional)
OR
VCR
DVD Recorder
TV
example of your existing antenna
connection
new antenna connection
Step 1: Connecting the
antenna cables
These connections enable you to watch
and record TV programs using the DVD
recorder. If the antenna signal is
connected via a VCR, Cable Box or
Satellite Receiver, ensure that these
devices are turned on in order to watch
or record the cable programs.
G
If your TV is equipped with an
Antenna In (RF IN) jack only,
see page 15 for the complete connection
to your TV.
G
If you want to connect to a VCR
and/or Cable Box/Satellite Receiver,
see page 16~18 for the complete
connection to your TV.
TIPS:
Before making or changing any connections, make sure that all the devices are disconnected from
the power outlet.
12
001_033_dvdr3355_37A_eng5
ANT OUT
ANT IN
RF OUT
RF IN
VCR/Cable Box/
Satellite Receiver
1
➠
2
1
Connect existing Antenna/Cable TV signal
(or from the Cable Box/Satellite Receiver,
labeled as RF OUT or TO TV) to the
ANTENNA
recorder.
2
Use the supplied RF coaxial cable to
connect TV
recorder to the antenna input jack (or
labeled as VHF/UHF RF IN) on your TV.
12
Antenna/
cable TV signal
TV
S-V ID E O
AU D IO
IN
O U T
V ID E O IN
jack on the DVD
socket on the DVD
21/3/05, 3:16 PM