Timer Recording (Vcr Plus+ System) - Philips DVDR3355 User Manual

Recording
Timer recording (VCR Plus+
System)
This is a simple programming system for
DVD recorders. To use it, enter the
PlusCode programming number
associated with your television
program. You can fi nd this number in
your TV listings magazine.
All the information needed by the DVD
recorder for programming is contained in
the programming number.
A
Turn on the TV power. Select the
correct Video In channel at the TV.
B
Press TIMER on the remote control.
The timer schedule list appears.
Timer Schedule
Source RecMode Date
1
2
3
4
5
6
C
Press OK to confi rm.
Or, press key to go to the next
available empty slot and press OK.
The VCR Plus+ System menu appears.
Enter the PlusCode programming
number for the show you wish to
record or press CANCEL for manual
timer recording. To go back to timer
schedule, press [RETURN].
D
Use the numeric keypad 0-9 to enter
the PlusCode programming number for
the show you wish to record. (e.g. :
5-312-4 or 5,312 4, key in '53124'.)
TIPS: Ensure that there is suffi cient space available on the DVD±R/±RW before recording.
You have to fi nalize the DVD±R, before it can be played on other players, see page 34.
30
1_DVDR3355_55_eng_17842.indd 30 1_DVDR3355_55_eng_17842.indd 30
(continued)
Start End
To clear the VCR Plus+
®
number, press CLEAR on the remote
control.
To cancel the VCR Plus+
use keys to select
menu and press OK.
E
To confi rm your entry, select
the menu and press OK.
The system will store the timer entry
and return to the timer editor menu.
If the channel number of the TV channel
has not been assigned to the
programming number, you will have to
manually key in the channel number that
is assigned to the VCR Plus+
Follow the instructions on the TV.
F
Press TIMER to exit the menu.
G
Insert a DVD±R/±RW into the DVD
recorder.
H
Press STANDBY-ON to turn off the
DVD recorder.
If the DVD recorder is not in standby
mode, a warning message will appear
three minutes before the recording
starts.
If you ignore the warning message,
the DVD recorder will automatically
switch to standby mode to prepare for
timer recording at the designated time.
The '
TIMER
display panel if a timer recording is set.
®
programming
®
programming ,
in the
CANCEL
CONFIRM
®
code.
' icon will light up on the
2005-11-04 4:46:49 PM 2005-11-04 4:46:49 PM
in