Step 1: Basic Recorder Connections; Connecting The Antenna Cables - Philips 810H User Manual

Step 1: Basic Recorder Connections

CABLE
Connecting the antenna
cables
These connections enable you to watch
and record TV programmes using this
recorder. If the antenna signal is
connected via a VCR, Cable Box or
Satellite Receiver, ensure that these
devices are turned on in order to watch
or record the cable programmes.
If you want to connect to a VCR
and/or Cable Box/Satellite Receiver,
see the chapter "Step 2 : Optional
Connections" for the possible
connections to your TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
14
ANTENNA
SATELLITE
A
AN-
TENNA
EXT 2 AUX - I/O
TV
EXT 1 TO TV - I/O
B
A
B
VIDEO
(CVBS)
S-VIDEO
(Y/C)
L
AUDIO
R
COAXIAL
AUDIO / VIDEO OUT
DIGITAL AUDIO OUT
Connect the existing Antenna/Cable TV
signal (or from the Cable Box/Satellite
Receiver {RF OUT or TO TV}) to the
ANTENNA socket on the recorder.
Use a RF coaxial cable (not supplied) to
connect the TV socket on the
recorder to the antenna input socket (or
labelled as VHF/UHF RF IN) on your TV.
Helpful Hint:
– Depending on how you have currently
connected your TV (directly from an
off-air antenna or Cable box or VCR), you
will have to disconnect some of the cables
before you make the above connection.
TV