Step 3 : Tv Channel Programming; Automatic Tv Channel Search - Philips DVDR3355 User Manual

Getting Started
Step 3 : TV channel
programming
Before the DVD recorder can start
recording the TV channel programs,
you need to search for the available TV
channels and store them in the recorder.
Note: Make sure you have successfully
made all the required connections to the
DVD recorder, the TV and Satellite
Receiver/ Cable Box (if any) and switched
them on.
Tuner settings can only be changed
when there is no disc in the disc tray.
OK
TIPS: Press to go back to previous menu item.
Press SYSTEM-MENU to exit the menu.
22
1_DVDR3355_55_eng_17842.indd 22 1_DVDR3355_55_eng_17842.indd 22
(continued)

Automatic TV channel search

This function will automatically scan all
the receivable analog local TV channels
and store these channels on the DVD
recorder.
A
Press SYSTEM-MENU on the remote
control.
B
Use
{ System Menu - Channel Setup }
and press
SYSTEM
MENU
C
Use
Input Source } and press OK.
{ Cable }
Select this if the DVD recorder is connected
directly to the cable signal or through a
set-top box.
{ Air }
Select this if the DVD recorder is connected
directly to an indoor or outdoor antenna.
D
Press OK to confi rm.
E
Use
Search } and press OK.
starts. This process may take several
minutes. Once complete, the total number
of channels found will appear on the TV.
The system menu appears on the TV.
keys to highlight
.
System Menu - Channel Setup
Tuner Input Source
Channel Search
Modify Channel Information
keys to highlight { Tuner
keys to highlight { Channel
The automatic TV channel search
Cable
Search
Edit
2005-11-04 4:46:48 PM 2005-11-04 4:46:48 PM