Connecting To A Vcr And Cable Box/Satellite Receiver - Philips DVDR3355 User Manual

Optional Connections
A
Antenna/cable
TV signals
B
Connecting to a VCR and
Cable Box/Satellite Receiver
A
Connect the Antenna/Cable TV signal to
the antenna input (RF IN) jack on the
Cable Box/Satellite Receiver.
B
Use the supplied RF coaxial cable to
connect the antenna output (RF OUT)
jack on the Cable Box/Satellite Receiver
to the ANTENNA
recorder.
C
Use another RF coaxial cable to connect
the TV jack on the DVD recorder to
the antenna input jack on the TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
16
1_DVDR3355_55_eng_17842.indd 16 1_DVDR3355_55_eng_17842.indd 16
(continued)
IN
VIDEO
RF
VHF/UHF OUT
RF IN
VIDEO
OUT
AUDIO
L
VHF/UHF AUDIO
R
RF OUT
C
jack on the DVD
OUT
AUDIO
S-VIDEO
R L
IN
VIDEO
IN
AUDIO
L
AUDIO
R
D
E
TV
AU D IO S-V ID E O IN
O U T
V ID E O IN
D
Use the audio/video cables to connect
the VIDEO/AUDIO IN-EXT on the
DVD recorder to the matching VIDEO/
AUDIO output jacks on the VCR.
E
Use the audio/video cables to connect the
VIDEO/AUDIO OUT-2 on the DVD
recorder to the matching VIDEO/AUDIO
input jacks on the TV.
Helpful Hints:
– You may use the S-VIDEO (Y/C) jack
instead of VIDEO (CVBS) jack if the
connected device has the same S-VIDEO
input/output jack. This video connection
provides better picture quality.
Back of a Cable Box or
Satellite Receiver
(Example only)
Back of a VCR
(Example only)
2005-11-04 4:46:47 PM 2005-11-04 4:46:47 PM