Step 1: Basic Recorder Connections; Connecting The Antenna Cables - Philips DVDR3360H User Manual

Step 1: Basic Recorder Connections

~
MAINS
Connecting the antenna
cables
These connections enable you to watch
and record TV programs using this
recorder. If the antenna signal is
connected via a VCR, Cable Box or
Satellite Receiver, ensure that these
devices are turned on in order to watch
or record the cable programs.
If you want to connect to a VCR
and/or Cable Box/Satellite Receiver,
see page 17~18 for the complete
connection to your TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
14
SATELLITE ANTENNA
CABLE
A
ANTENNA
TV
B
A
Connect the existing Antenna/Cable TV
signal (or from the Cable Box/Satellite
Receiver {RF OUT or TO TV}) to the
ANTENNA
B
Use the supplied RF coaxial cable to
connect the TV
to the antenna input jack on your TV
(VHF/UHF RF IN.)
Helpful Hint:
– Depending on how you have currently
connected your TV channel (directly from an
off-air antenna or Cable box or VCR), you
will have to disconnect some of the cables
before you make the above connection.
VIDEO
VIDEO
(CVBS)
(CVBS)
S-VIDEO
(Y/C)
L L P
AUDIO AUDIO
R R P
AUDIO
EXT 1
OUT 2 OUT 1
jack on the recorder.
jack on the recorder
Y
B
R
COAXIAL
DIGITAL AUDIO OUT
TV
S-V ID E O IN
AU D IO
O U T
V ID E O IN