Related Manuals for CHIEF SL220-SK5
Summary of Contents for CHIEF SL220-SK5
- Page 1 S E R V I C E M A N U A L Rear Wall Replacement Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description SL220-SK5...
- Page 2 B (5) 8-32 x 1" A (1) [SL220 Rear Wall Assembly] F (3) [4" cable tie] E (1) 5/32" *NOTE: The appearance of these parts may vary from the parts being removed during service due to Chief’s program of continuous improvement.
- Page 3 Service Manual SL220-SK5 REMOVE SL220 Gently pull projector cradle away from sides at rear of SL220. (See Figure 3) Remove projector and cabling. The forward/aft adjustment screws may need to be Unplug lift and save cord. loosened for this. If so, loosen the screws, but do NOT remove the screws.
- Page 4 SL220-SK5 Service Manual Remove four Phillips head screws holding the SL220 to the 11. Lower lift out of SL220 frame. frame, two from the front and two from the back of the 12. Place lift upside down on flat surface.
- Page 5 Service Manual SL220-SK5 Replacing Rear Wall Orient lift assembly so that the rear of the SL220 (with the electrical opening) lines up with the outlet box attachment Attach rear wall assembly (A) to SL220 assembly using plate on the SL220 frame. (See Figure 11) eight 06-32 x 5/16"...
- Page 6 (F), as required. (See Figure 14) 13. Test and adjust projector, as required. Tighten rear spacers. 14. Return removed rear wall assembly to Chief Manufacturing. Rear of SL220 Figure 14 10. Reconnect grounding strap from inside front of SL220 to projector cradle, using the Phillips head screw previously removed.
- Page 7 Service Manual SL220-SK5...
- Page 8 Europe A Franklinstraat 14, 6003 DK Weert, Netherlands P +31 (0) 495 580 852 F +31 (0) 495 580 845 Chief Manufacturing, a products division Asia Pacific A Office No. 1 on 12/F, Shatin Galleria of Milestone AV Technologies 18-24 Shan Mei Street...
Need help?
Do you have a question about the SL220-SK5 and is the answer not in the manual?
Questions and answers