camera. The camera connects to any of the video
inputs (1-4) on the back of the monitor. This system
will accommodate up to 4 cameras. The monitor
supplies power to each of the cameras.
1. Plug the power adapter into the power jack on
the back of the monitor, then into an AC outlet.
2. Turn on the monitor by pressing the 'Power'
button on the front of the unit and set the volume to
3. Select the appropriate "channel" (1-4) on the
monitor that corresponds to the input (1-4) the
camera lead is connected. (See Channel Selection).
4. Adjust the sound level at the front of the monitor
with the volume control knob. Brightness/Contrast